With a market leading airflow to ensure optimum capture, it is designed to work alongside appropriate PPE guidelines. The DentalPRO Aerosol works to disrupt the directional airflow to filter aerosol direct from the patient, ejecting filtered air away from dental staff breathing zones.
It is simple to use and maintain, and there’s no need to vent outside as the filtered air is sent back into the room. Its three-stage filtration includes a HEPA filter which removes 99.997% of particles at 0.3 microns.
The unit works on three set points: idle mode, AGP mode, and room scrubber mode.
Due to the large adjustable flow rate, the DentalPRO Aerosol may be used for a variety of procedures between dental staff and patient and can be turned to maximum capacity for applications that involve heavier aerosol generation.
Is this the system for you?
Let our experts guide you on the best system for your requirements
Key features of the DentalPRO Aerosol
DeepPleat pre filter
The DeepPleat pre filter incorporates a sealed pleated layer of F8 media of at least 100mm in height, giving an impressive surface area for its size.
BOFA uses mini pleat design HEPA (high efficiency particulate air) filters which are tested and certified to a minimum efficiency of 99.997% down to 0.3 microns and 95% as small as 0.1 micron. They incorporate a series of webbing between the pleated media. This feature not only guarantees even spacing for full filter coverage between each pleat, but also alleviates the possibility of airflow vibration or collapse.
Advanced carbon filter technology
ACF assures safe capture and removal of hazardous fumes.
Contaminated air must remain in contact with the carbon bed for a period of time sufficient to ensure that no contaminants or odours are emitted (‘dwell time’). Our filters have been developed to capture all contaminants and odours, eliminating the risk of bypass and/or tunnelling.
Multi voltage sensing unit
Automatically senses the local voltage and adjusts accordingly, between 90-275V.Automatically senses the local voltage and adjusts accordingly, between 90-275V.
ProTECT service plan
Our PROtect LEV service plan and compliance certification has been designed to give you the peace of mind that your LEV (Local Exhaust Ventilation) systems are being expertly maintained throughout their working life and you are kept within government guidelines and regulations in the UK.
SureCHECK quality standard
We recognised that quality, health and safety and environmental management are integral to our management. SureCHECK is far more than just written words, it touches every employee and is engrained within the company’s culture and business ethos. It is applied consistently across all our business activities on a world-wide basis.
Three stage filtration - F8 Pre filter / HEPA / Gas filter
Complete with flter condition indicator
Low noise level
Digital air flow control
3 set points: Idle mode / AGP mode / Room scrubber mode
VOC Sensing (Volatile Organic Compound)
Datasheet correct at time of publishing. For specific applications, please contact us for details.