bofa-section-shape
3D Manifolds

'Print your own' 3D manifolds

The BOFA 3D manifolds for 3D printing have been provided free of charge for you to print your own.

The two manifolds are designed to work with the 3D PrintPRO 2 and 3 extraction systems, to provide an air delivery system on one side of the 3D printer, and an air extraction system on the other.

Available in 30mm (inlet) and 50mm (inlet and outlet).

3D PrintPRO 3
bofa-section-shape

There are four parts to each of the manifolds, a connection spigot and first piece, a middle piece (which can be repeated to extend the manifold), and an end piece.

The air outlet has slots along the top of the manifold, allowing a clean band of ultra clean air to flood the open face of the printer.

The air inlet manifold has a open grill of hexagons sucking in the contaminated air, which will pull all the fumes and printing vapors away from the 3D printing area, allowing for a clean working environment and precise final print.

The end plug and connection spigots can be put on either end of the manifold to allow for correct positioning on the 3D printer.

Outlet and inlet manifolds

3D manifold airflow diagram

The free of charge print your own files for the 30mm & 50mm manifolds for the 3D PrintPRO 2 and 3D PrintPRO 3 have been provided in STEPS format for you to use on your own 3D printer. This allows you to print as many parts as needed in which ever combination suits you best, to fit your 3D printer. If you need more help, please contact us.

30mm inlet and 50mm inlet/outlet manifolds

3D Hose kit manifolds
3D PrintPRO hose kits
3D PrintPPRO 3 - Open printer render with 3D mainfolds