AD Base 3
AD Base 3
The AD Base 3 is designed for the smaller Universal Versa Laser. The dimensions of the unit allow the Versa laser to fit perfectly onto the extractor, effectively doubling it up as a work station.
The unit is also offered with an onboard air compressor to provide the laser with its air assist requirements and comes complete with extraction hose kit and compressor link up on compressor models.
Key features of the AD Base 3
DeepPleat DUO pre filter
This pre filter comes in three main sizes and incorporates a massive drop-out chamber and large volume area within the base of the filter. Above the drop-out chamber but still within the housing there is a sealed 200mm deep pleat layer of F8 media giving an impressive surface area.
BOFA uses mini pleat design HEPA (high efficiency particulate air) filters which are tested and certified to a minimum efficiency of 99.997% down to 0.3 microns and 95% as small as 0.1 micron. They incorporate a series of webbing between the pleated media. This feature not only guarantees even spacing for full filter coverage between each pleat, but also alleviates the possibility of airflow vibration or collapse.
Automatic flow control (AFC) technology
Automatic flow control (AFC) allows the operator to preset the correct airflow rates for the specific application, subsequently maintaining the airflow. This generates lower noise levels and ensures further protection of the more expensive HEPA filters.
Reverse flow air (RFA) technology
The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensure longer life.
Advanced carbon filter (ACF) technology
ACF assures safe capture and removal of hazardous fumes.
Contaminated air must remain in contact with the carbon bed for a period of time sufficient to ensure that no contaminants or odours are emitted (‘dwell time’). Our filters have been developed to capture all contaminants and odours, eliminating the risk of bypass and/or tunnelling.
BOFA invests in innovation and our products and technology have a heritage of being tried, tested and trusted for over 30 years. As the market leader, we are proud of our product designs and technology and take great care in protecting this intellectual property and our integrity. Our product range includes aspects which are protected under patent copyright, design copyright, registered design and trade mark laws.
ProTECT service plan
Our PROtect LEV service plan and compliance certification has been designed to give you the peace of mind that your LEV (Local Exhaust Ventilation) systems are being expertly maintained throughout their working life and you are kept within government guidelines and regulations in the UK.
SureCHECK quality standard
We recognise that quality, health and safety and environmental management are integral to our management. SureCHECK is far more than just written words, it touches every employee and is engrained within the company’s culture and business ethos. It is applied consistently across all our business activities on a world-wide basis.
Filter condition indicator
Low noise level
DeepPleat DUO pre filter
VOC gas sensor (Volatile Organic Compound)
Remote stop / start interface
Filter change / System fail signal
Datasheet correct at time of publishing. For specific applications, please contact us for details.